Ichl
Active member
Axe-Fest 2023 Teilnehmer
Axe-Fest 2022 Teilnehmer
Axe-Fest 2019 Teilnehmer
Axe-Fest 2018 Teilnehmer
Axe-Fest 2017 Teilnehmer
- Mitglied seit
- Okt 12, 2012
- Beiträge
- 191
Hallo zusammen,
das Update für die MFC ist verfügbar falls es jemand noch nicht mitbekommen hat.
Release 2.16
Upgrading from 2. x
MFC-*‐101 firmware 2.16 is fully compatible with previous 2.15 firmware versions. Upgrading from earlier versions of 2.x may require you to re-*‐
assign Axe-*‐Fx Mode IA switches as they changed in v2.13.
To reset the MFC-*‐101 to factory default settings after upgrading, reboot while holding down the #11 footswitch, then press #14 to reset.
Upgrading from 1.04 or older
It is strongly recommended that you restore factory setting after upgrading from 1.0x to 2.x. by holding the #11 footswitch while powering on.
If you want to avoid this, please read the release notes for archived MFC-*‐101 firmware version 2.01:
http://www.fractalaudio.com/downloads/firmware+presets/mfc-*‐101/archive/mfc101_201.zip
WHAT’S NEW?
===============================================
1. Added support for slowed-*‐down MFC-*‐to-*‐MFC SysEx dump. Use option “SLOW-*‐DUMP” for machine-*‐to-*‐machine transfers.
2. Added startup delay to allow Axe-*‐Fx to properly come online before MFC-*‐101 tries to sync.
3. Fixed bug in Looper operation where Scenes would be incorrectly recalled.
das Update für die MFC ist verfügbar falls es jemand noch nicht mitbekommen hat.
Release 2.16
Upgrading from 2. x
MFC-*‐101 firmware 2.16 is fully compatible with previous 2.15 firmware versions. Upgrading from earlier versions of 2.x may require you to re-*‐
assign Axe-*‐Fx Mode IA switches as they changed in v2.13.
To reset the MFC-*‐101 to factory default settings after upgrading, reboot while holding down the #11 footswitch, then press #14 to reset.
Upgrading from 1.04 or older
It is strongly recommended that you restore factory setting after upgrading from 1.0x to 2.x. by holding the #11 footswitch while powering on.
If you want to avoid this, please read the release notes for archived MFC-*‐101 firmware version 2.01:
http://www.fractalaudio.com/downloads/firmware+presets/mfc-*‐101/archive/mfc101_201.zip
WHAT’S NEW?
===============================================
1. Added support for slowed-*‐down MFC-*‐to-*‐MFC SysEx dump. Use option “SLOW-*‐DUMP” for machine-*‐to-*‐machine transfers.
2. Added startup delay to allow Axe-*‐Fx to properly come online before MFC-*‐101 tries to sync.
3. Fixed bug in Looper operation where Scenes would be incorrectly recalled.
