Ich hasse es gerade, das meinAxe-Fx derzeit mal wieder im Proberaum steht
Trotzdem: Zwei SCENES Controller, an die man Block-spezifische Parameter hängen kann UND jeweils pro Scene einen eigenen Wert representieren können ... das ist eröffnet dem Axe nach der Einführung von Scenes nochmal einen riesen Schub in Sachen Flexibilität und kann auch extrem helfen mit Ressourcen wieder sparender umzugehen.
Für vieles wird jetzt kein zweites Preset benötigt, nur weil sich ein bestimmter Wert in einem Block ändern soll/muss. Man kann X/Y`s einsparen, die Nutzung von zweiten Blöcken einsparen oder für etwas anderes gebrauchen.
GROßES KINO!!!!!!!! I love it! (Und nachdem ich so wenig Begeisterung für`s Cab-Lab zum Ausdruck bringen musste, darf ich hier auch mal meine große Freude über diesen Punkt anmerken, oder?! Das ist echt
DER HAMMER!!!!!!)
Auch bei vielen anderen Neuheiten wurde auf die Community gehört, viele Punkte, die verbessert und implementiert wurden gehen diesmal auf Wünsche und Hinweise durch viele User des FAS Forums ein! Ich glaube einer ist sogar ein WISH von mir:
"Added Scene indication to main Layout page"Liest sich für mich sehr nach meinem Wunsch, den ich
HIER geäußert hatte.Von daherbin ich da natürlich besonders neugierig, wie das aussieht: Hat vielleicht wer die Güte und Möglichkeit, mal kurz per Handy nen screenshot zu knipsen und zu posten? Das wäre super nett
TOLLES, TOLLES up
GRade
- ich bin schwer angetan von den
release Notes:
*******************************************************************************
12.00
Added two “Scene Controllers”. These controllers have a constant value that is
programmable per scene. The controllers are accessed via the Control->Scene
menu. These controllers can be used to control a parameter such that it has a
different value in each scene. For example, Scene Controller 1 might have a
Scene 1 value of 10% and a Scene 2 value of 20%. This controller can be
attached to Reverb Mix, for example, which would give a higher Reverb mix in the
second scene compared to the first scene.
Improved diode models in Drive block. This affects Drive types that use the GE
Diode, SI Diode and new LED Clip Types.
Added LED Clip Type to Drive block (see above).
Added “FAS LED-Drive” Drive model.
Added “Tube Drv 4-Knob” Drive model based on a “4-knob” Butler Tube Driver. The
existing “Tube Driver” model has been renamed “Tube Drv 3-Knob”.
Improved Amp block power supply current draw modeling which improves “feel”.
Improved Amp block phase-inverter-to-power-tube-grid interaction modeling which
improves transient response resulting in faster attack. This also improves the
clarity of notes especially when using heavily overdriven power amp settings.
Added Global “Modeling Version” parameter to select between Version 11.xx or
Version 12.xx power amp modeling.
The Amp block “Grid Modeling” parameter has been renamed and repurposed. The
new name is “Modeling Mode” and offers the following choices:
1. Authentic – Replicates a tube amplifier with the utmost accuracy.
2. Grid Cond Off – Turns off grid conduction modeling in the power amp
simulation. This reduces blocking distortion.
3. Smooth – Sets Triode Hardness to the minimum value essentially creating
an ideal preamp and turns off grid conduction modeling in the power
amp. This removes most of the “nasty” distortion that tube amps
create.
4. Ideal – Removes most of the “warts” from the modeling which includes
grid conduction, output transformer distortion, bias shifting and AC
power supply modeling. Supply sag, screen voltage effects and
crossover distortion are still modeled.
5. Ideal/Smooth – Same as #3 but also sets Triode Hardness to its lowest
value. This is in essence an ideal preamp plus an ideal power amp.
The audibility of these settings is dependent upon the particular amp
model and various parameters. The use of these modes in conjunction with
other parameters can yield idealized tones not achievable with real tube
amps.
The first two choices duplicate the previous behavior of the deprecated
“Grid Modeling” parameter so no changes are required to existing presets.
Note that when “Ideal” is chosen the global Modeling Version parameter is
irrelevant.
Added “5F1 Tweed” amp model based on a Fender Champ. This particular amp
exhibits a unique breakup characteristic due to its single-ended design and
simple circuit.
Added “Wrecker 2” amp model based on a Trainwreck Express.
Added “Two Stone J35 2” amp model based on a Two Rock Jet 35 with the Preamp
Bypass switch off. The existing “Two Stone J-35” model has been renamed “Two
Stone J35 1”.
Added “Wrecker 2” and “Skyline Deep” tone-stack types to Amp block. Skyline
Deep is the Skyline tone-stack with the Deep switch engaged.
Added “ODS-100 Lead 3” amp model based off a non-HRM Dumble with the Preamp
Bypass switch off.
Changed the Amp block Overdrive knob now defaults to 7.5 when selecting an amp
model that uses this knob as this is a more typical value.
Added Level control to Enhancer block Classic mode.
Tremolo block now resets LFO when bypassed so that LFO starts at 90 degrees when
effect is engaged.
Added Scene indication to main Layout page.
Fixed Delay block Ping-Pong type mix level twice what it should be.
Fixed activating Hold in Delay block causes swelling in echos.
Fixed Reverb clicking for Room, Catherdral and Studio types when size is greater
than 85.
Fixed Pitch block Arpeggiator where certain scale degrees would sound the root
instead of the desired harmony.
Fixed corrupted user cabinet data can cause erratic behavior.
Fixed corrupted MIDI streams can cause crash.
*******************************************************************************